technology
How To Install Grub Bootloader In Windows 10?

How To Install Grub Bootloader In Windows 10?

The three interfaces of Grub functions at various levels. The menu interface consists of the list of kernels or the operating systems.

You have the option to select a particular operating system with the help of the arrow keys and you can boot it with the Enter key.

All the Commands in Grub are displayed in the menu entry editor interface. You can change the commands before you load the Operating System.

The Command-Line interface is the basic interface that provides the user with the utmost control. You can execute any command with the help of it.

You may sometimes encounter how to install a grub bootloader in windows 10 issues raised by the corrupted boot directory or the partition.

Restore Grub After Windows Install

The Grub Bootloader is particularly important as you cannot start the Operating System without it.

While you switch on the program, this is the first program that gets started. Then the Bootloader transfers the control it has to the Operating System Kernel.

When you are stuck with how to install a grub bootloader in Windows 10, you can go for a clean installation of Windows 10 or reset your BIOS settings. These may help you to resolve the problem.

You also have other options to fix it like rebuilding the BCD or simply replacing your damaged hard drive.

Through this article let us address the possibilities to fix the Grub related problem effectively.

Solution 1: Setting The Correct Partition 

If the correct partition gets deactivated somehow, you face this grub related problem and need to go for restoring grub after windows install.

This happens as the boot loader gets initiated by the BIOS from the active partition.

We suggest you verify whether the active partition is incorrect. Then you will have to get the proper partition activated.

See also  Steam Download Stuck At 100 Percent!

This process works wonder to fix the grub related issues swiftly. Follow the steps mentioned below to execute the process:

Step 1: First of all you need to connect a DVD or USB Flash Player bootable media to your PC.

Step 2: Then give your system a fresh restart to execute the Automatic Repairing Process.

Step 3: Select to Troubleshoot and go to the Advanced options. Now, launch Command Prompt and enter diskpart and hit the Enter button.

Step 4: Input the commands mentioned below one after another:

  • list disk: This will give you the list of all your hard drives
  • select disk n: n denotes the disk where you have installed the operating system.
  • list volume: All the Volumes on Disk 0 will be enlisted here.
  • select volume n: he will give you the number of system partitions
  • active: this will show you the active system partition. Identify the specific partition from the displayed list that ought to be active.

Step 5: Now, enter the commands given below and after inputting each one, press the Enter Key.

  • select partition d
  • active
  • quit

Step 6: After you have finished the above step give your Computer a fresh restart.

Check whether your Grub related problem is solved this way.

Solution 2: Resetting the BIOS Settings

Resetting BIOS is another effective way to fix grub after windows 10 upgrade.

Here I am providing you a complete guideline to execute the task. Follow the steps:

Step 1: Turn off your computer and wait for a couple of minutes, then give it a fresh restart.

Step 2: Now, press F2 and repeat the process till you see the System Screen Window.

The function key may vary from system to system. Give it a check while you start your system.

Step 3: Now with the help of the Right Arrow Key go to the Exit menu bar.  Then move on to the Load Optimized Defaults.

Step 4: After you pressed the Load Optimized Device option, hit the Enter button.

After you accomplished the entire procedure check whether this has helped. You also have the option to flash the BIOS of your computer to fix the issue.

See also  Top 5 Free GoPro Editing Software For Windows 10!

Solution 3: Using the Automatic Repair and restoring the Boot Sector Code

You may use your automatics repair system provided by Windows 10 and run are repairing process for restoring grub after windows install.

The boot sector code may be damaged and this may create the problem. So, you need to restore the boot sector code so that the grub rescue error is not prompted.

For this, I am describing the process that you are required to follow meticulously.

Step 1: Give your PC a fresh restart for repeated times and then select to Troubleshoot. From the displayed panel, choose Advanced and from there move on to Start-up Repair.

Step 2: Now, the repairing process will commence. Wait till the procedure gets completed.

We recommend you not to proceed for any operation in between. After that check, if that was good enough to address your problem.

Step 3: You have another option to use DVD or USB Flash Drive for resting the boot Sector Code.

For this, connect the bootable USB or DVD to your PC give your computer a fresh restart to go to the Automatic Repair Mode.

Step 4: Now proceed to Troubleshoot and then go to the Advanced Tab.

Step 5: Now Enter cmd to launch Command Prompt. Input the given commands in the Command Prompt. Do not forget to hit the Enter button after you type them.

diskpart

select disk 0

list volume

This way you will get all the volumes displayed. In the Type section, you will get to see DVD-ROM.

Make sure to remember the letter for the drive of the DVD or USB Flash Drive that you have connected to your Device. Like D or E.

Step 6: Now, enter the commands that I am providing below and click Enter.

Exit

D: or E:

CD Boot

Dir

Step 7: Scrutinize whether there is bootsect.exe file in the provided list. On finding it input the given command and then hit the enter button.

bootsect /nt60 SYS /mbr

Exit

Step 8: Now reboot your Computer and hope this will solve the problem you are muddling with.

See also  How To Fix Firefox Not Saving Passwords Error?

Solution 4: Clean Installation Of Windows 10

To repair grub from windows, install Windows 10 afresh so that the installations done previously completely get removed.

For this, you will have to download the ISO file of Windows 10 on another device and get it burned on a DVD. You may also proceed with creating a USB drive that you can boot.

You may take the help of a third-party utility or you may also fix the boot related error if you create a bootable media.

That will automatically help you launching the program, selecting the proper partition, etc.

Solution 5: Rebuilding BCD With The Help Of Windows 10 Automatic Repair

If you cannot find bootsect.exe file, then you may need to rebuild BCD to combat your Grub issue.

Many users have reported that by using this rebuilding BCD technique they could easily fix the Grub related issue.

Follow the given process described below to rebuild the BCD:

Step 1: First of all you will have to connect bootable USB Flash Drive DVD to your system.

Step 2: Then reboot your PC and go to the Automatic Repair Mode.

Then from the advanced window choose Command Prompt for initiating BCD Files.

Step 3: Enter the below-given commands in the Command Prompt and when you have finished press Enter:

  • Bootrec /Fixmbr
  • Bootrec /Fixboot
  • Bootrec /Rebuildbcd

Step 4: When you complete the process, exit from Command Prompt and then give your device a fresh restart.

Solution 6: Replace The Hard Drive

Sometimes you may face several issues with your hard drive. Your hard drive may get damaged somehow and this may lead to the Grub rescue issue along with other burning issues for your system.

In case you discover that your hard drive is damaged, we suggest you replace it immediately.

Hard Drives are available on your manufacturer’s website or from the retail sites then replace your drive and clean install Windows 10 to get rid of the Grub related problem.

Winding Up

Hope the resolutions provided could give you the answer to how to install grub bootloader in Windows 10.

If you still have queries or issues with the related files, feel free to intimate us in the comments section or may shoot us a mail.

We always look forward to hearing back from you.

Related posts:

Why My Avast Behavior Shield Keeps Turning Off?

How To Disable Incognito Mode Or Private Browsing Setting?

Avast Update Stuck At Initializing Issue Fixed!

“Aw, Snap! Google Chrome Ran Out of Memory” How to Fix the Error?